Mini carrier

  • Manoeuvrable, payload-optimised trailer for transporting skip containers in accordance with DIN 30720/30720-1 and swap compactors without rollers
  • "Made in Germany"
  • Combined load securing crosswise and lengthwise as well as transverse lashing with one chain tensioner each
  • Individual trailer configuration designed to meet your requirements
  • OPTIONALS: closed floor / equipment for transporting swap compactors with rollers
  • OPTIONALS: Front-loading design with telescopic tow bar
  • OPTIONALS: Multi-Fix load securing without chains
  • OPTIONALS: Safety-Fix time-saving load securing

TYPE DESIGNATION

  • MINI CARRIER
  • Single tyres HTM
  • Various length versions
  • Versions for different international roller container standards

WEIGHTS

  • Total weight (techn./perm.): from 10 t - 18 t possible, depending on the national approval regulations. Standard design with 13 t total weight
  • Additional or reduced weight depending on the equipment.

DIMENSIONS

  • Skip container 5 m³ – 20 m³ (DIN 30720/30720-1)
  • Total lengths depending on the type design

FRAME

  • The frame consists of two parallel-running, specially designed longitudinal beams with canted steel, supported by optimised cross members that are welded by robots. The longitudinal beams serve as a support for the skip containers.
  • Gear cranked support leg with a load capacity of 12,000 kg
  • With flexible lashing points on the outer frame and corresponding thrust locks, containers of different sizes can be variably loaded.

CHASSIS

  • We only use axles from renowned manufacturers. Air suspension chassis with disc brakes or drum brakes.
  • Tyres
  • 4 tyres 285/70R 19.5 (6.5 or 7 t axles)
  • Other tyre sizes upon request.
  • Optional: Spare wheel, tyre pressure monitoring and control systems, manual lifting/lowering functions, axle load display.

BRAKE SYSTEM

  • -    WABCO brake system with ABS and EBS
  • -    Knorr brake system with ABS and RSP as an option
  • Optional:
  • -    Brake pad wear display
  • -    Rear area monitoring (Wabco)

ELECTRICAL EQUIPMENT

  • Hella module lighting device with function lights with partially LED technology, including LED position light, LED outline marker lights at the rear
  • Optional:
  • -    LED work lights
  • -    2 additional LED reversing lights at the rear
  • -    Three round LED tail lights, instead of the module lights
  • -    Various warning and surrounding lights
  • -    Independent "PS-Fix" parking light system

PAINTWORK

  • Paintwork in one RAL colour according to the customer’s wishes (except metallic colours), load securing elements in RAL 1003 signal yellow as standard.
  • Automatic blasting:
  • Before the paintwork, the trailer chassis are blasted in the automatic blasting machine specially designed for our trailer types, based on 12 consistently strong, automated and ring-shaped blast wheel turbines. Thanks to the special Hüffermann blasting abrasive, this results in a more homogeneous blasting pattern. Within the scope of the control process, additional blasting is performed manually, depending on the chassis design.
  • Priming: Application of an epoxy resin-based primer without electrostatics. Also for long-term and resilient corrosion protection.
  • Top coat: The 2-component top coat with a high solid content is individually applied in the desired colour (RAL) with the electrostatic method. As a result, even the smallest cracks are covered with paint and the protection and look is preserved over the years.
  • Sealing: After the assembly and the final approval of the vehicle from Quality Assurance, the vehicle is preserved at material contact points and transitions.  Preservation is accomplished with Dinitrol cavity wax.
  • Standard version without paintwork on the side collision protection, silver rims. Axles with black CDP coating. Add-on parts are galvanised.
  • Optional: Arc galvanising
  • Zinc wire is melted by an arc, atomised with compressed air and applied onto the freshly blasted surface of the chassis (without add-on parts). Together with the subsequent paintwork, this achieves corrosion protection with similar properties as hot-dip galvanising. Another advantage is the low heat input. This ensures that the structure of high-strength steels is not modified and large areas do not tend to warp.
  • Electrical arc galvanising offers a clear advantage in terms of the duration of protection, hardness, bonding strength, abrasion resistance, stone chipping resistance and edge protection.

ACCESSORIES

  • Rear marking
  • -    ECE sign
  • Optional: Waste, parking or ADR signs
  • -    Wheel chocks (2)
  • Optional storage areas:
  • -    Standard storage box 470 x 380 x 380 mm
  • -    Stainless steel storage box
  • -    Storage area for nets in different sizes

DRAWGEAR

  • Fixed or optionally height-adjustable tow bar with typed drawgear. Depending on the total weight, 40 mm or 50 mm drawbar eye. Front-loading versions with telescopic tow bar

LOAD SECURING

  • Skip containers are secured with combined load securing crosswise and lengthwise as well as transverse lashing with one chain tensioner each. The slip protector in the travel direction is accomplished with pluggable wedges with an oscillating contact surface, that adapts to the container inclination.

ADD-ON PARTS

  • Underride guard, with horizontal rollers
  • Side collision protection consisting of one horizontal anodised aluminium profile with fastening brackets that are rigidly mounted
  • Plastic single wheel mudguard with spray guard
  • Optional:
  • 1 spare wheel holder
  • Hüffermann rubber apron
Frontansicht mit Stützwinde, höheneinstellbarem Zugrohr und schraubbarer Zugöse

Frontansicht mit Stützwinde, höheneinstellbarem Zugrohr und schraubbarer Zugöse

OPTIONAL: Autarkes Beleuchtungssystem

OPTIONAL: Autarkes Beleuchtungssystem

OPTIONAL: Edelstahlstaukiste

OPTIONAL: Edelstahlstaukiste

OPTIONAL: Kettenlose Ladungssicherung - verstellbarer Multi-Fix

OPTIONAL: Kettenlose Ladungssicherung - verstellbarer Multi-Fix

Sonderausstattung Behälterabdecksystem

Sonderausstattung Behälterabdecksystem

Sonderausstattung für Müllpressen

Sonderausstattung für Müllpressen

Sonderausstattung geschlossener Ladeboden aus Stahlblech und Safety-Fix

Sonderausstattung geschlossener Ladeboden aus Stahlblech und Safety-Fix

Unterfahrschutz mit Anfahrrollen und Bedienung für die zentrale Fallstütze

Unterfahrschutz mit Anfahrrollen und Bedienung für die zentrale Fallstütze

Zentrier-Fix umsteckbar auf verschiedene Behältergrößen

Zentrier-Fix umsteckbar auf verschiedene Behältergrößen

Your Hüffermann contact persons

Always nearby. We are delighted to help.

Search contact persons

The Hüffermann construction kit is convincing in every application

The modular construction from Hüffermann brings you two main advantages: an individual construction, which is exactly designed to your requirements and a high quality production – completely “Made in Germany” guaranteed. Hüffermann only uses first-class vehicle components from well-known manufacturers, which pays off for you through longevity over the service life.

Read more

Hüffermann production

Our promise of quality to you

Hüffermann products are exposed to a wide variety of environmental influences on a daily basis. This places high demands on the material and paintwork of the vehicles. Hüffermann uses the most modern technologies here in order to guarantee a long-lasting appearance even in extreme applications.


Read more